Light yellow transparent liquid
Composition
TMC-114 (38s) is nono-alkoxy pyrophophato coupling agent and similar to KR-38s (Kenrich chemical Company, USA).
Technical Index
Density: D25=1.050 g/cm3;
Viscosity:¦Ç25 400+15% mm2/s;
Diopter Coefficient: About 1.46;
Flash Point: (Open) 70;
PH (Test Paper): About 2;
Performance
It is one kind of surface active agent for pigment and filler and has good dispersion property and good coupling result for organic or inorganic material.
Dosage
0.5~2.0% of the pigments or filler¡¯s weight. And recommended volume is 1.0%. The best dosage should be determined by experiments before us.
Range of Application
This product may be used in fillers and pigments such as light/heavy CaCO3, earthenware clay, silica, talcum, clay, and metal oxide.
It can also be used in polyolefin system, crude rubber system, rubber polymer system, alkyd resin system, and acrylic acid system.
It can be used in raw material such as filling, strengthening, flame-retarded, and rubber.
Feature
? This product can improve the filler¡¯s content in resin and rubber.
? It can increase flame-retarded property and improve intensity.
? It can improve the dispersion of the pigment and efficiency per unit work. At the same time, it can improve flowing property of extrude.
? It can be used to treat the mixed filler of rubber and plastic.
? It can be used in the material which is light color, white color, and improve color brightness of the product.
Usage
Use thinner to dilute this product. Then spray it into high-speed mixing pigment and filler. Stir 5~15 minutes continuously, and put it in resins and other assistant according to original process.
Solvent
Isopropyl alcohol, liquid wax, solvent oil etc.
Caution
No water contacted.
Validity for two years from the delivery date.
